Date of online application for PG programmes is extended up to 30th June 2024

Department of

MECHANICAL ENGINEERING

Quick View

Dr. Golam Kibria Assistant Professor / MECHANICAL ENGINEERING

Email : gk.mech@aliah.ac.in

Address : 1st Floor, Faculty Room, Department of Mechanical Engineering, Aliah University, II-A/27, Action Area-II, Newtown, Kolkata, West Bengal, India, 700160.

Phone : 033 23416592

Joined : 14-05-2012

Dr. Golam Kibria is presently working as an Assistant Professor in Mechanical Engineering Department, Aliah University, Kolkata, West Bengal, India. He has completed his M.Tech. (in 2008), as well as Ph.D (in 2014) from Production Engineering Department from Jadavpur University, Kolkata. He has authored several internationally recognized books (Authored books = 3, Edited books = 5). He also authored several book chapters in different edited books published by International Publishers such as Springer, Elsevier, Nova Science, etc. Dr. Kibria has worked as a senior research fellow (SRF) in Council of Scientific and Industrial Research (CSIR)-sponsored project from 2008 to 2011. He has also published several technical papers in national and International reputed journals (total international journal papers = 44, national journal papers = 4). Dr. Kibria has also presented papers in number of national and international conferences. His research interests include non-conventional machining processes, micromachining, and advanced manufacturing and forming technology. He is a life member of The Institution of Engineers (IEI), India. Dr. Kibria is an editorial board member as well as a reviewer of a number of reputed international journals, namely Optics and Laser Technology, International Journal of Advanced Manufacturing Technology, Manufacturing Review, and International Journal of Physical Sciences. In his credit, he has received I.S.T.E. National Award for Best M.Tech. thesis in Mechanical Engineering in 2008. He also received the Institution Prize (Gold Medal) of 2008–2009 from The Institution of Engineers (India) for the best paper.

Education

  1. Ph.D., Dept. of Production Engg., Jadavpur University, 2014. (LASER MICRO-MACHINING)
  2. M. E., Dept. of Production Engg., Jadavpur University, 2008.
  3. B. Tech., Dept. of Mechanical Engg., Kalyani Govt. Engg. College, MAKAUT (Formerly WBUT) University. 2006.

Teaching Experience

More than 12 years teaching experience 

Field of Specialization

  1. Manufacturing Technology
  2. Advanced Manufacturing and Microfabrication
  3. Micromachining Processes
  4. Additive Manufacturing
  5. Ultra Precision Technologies 
  6. Laser based Material Processing 
  7. Nanofinishing Technologies

Courses Taught/Teaching

1. Machine Tools and Machining

2. Advanced Machining Processes

3. Advanced Metal Forming Processes

4. Micromachining and Nanotechnology

5. CAD./CAM

Research Area

  1. Manufacturing Technology
  2. Advanced Manufacturing and Microfabrication
  3. Micromachining Processes
  4. Laser based Material Processing 
  5. Nanofinishing Technologies

Conference Papers Published

  1. G. Kibria, B. Doloi, B. Bhattacharyya, “Micromachining of Advanced Ceramics by Pulsed Nd:YAG Laser: A Review”, Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA 2009, Velammal Engineering College, Chennai – 600 066, Tamil Nadu, India, pp. 695-700. ISBN 978-81-908086-0-6
  2.  G. Kibria, B. B. Pradhan, B. R. Sarkar, B. Bhattachayya, “Influence of different dielectrics on Micro-EDM Characteristics during machining of Ti-6Al-4V”, Proceedings of the 23rd International and 2nd AIMTDR Conference, Dec. 15-17, 2008, IIT Madras, pp. 633-638. ISBN 9788190423571
  3. B.B.  Pradhan, G. Kibria, B. Bhattacharyya, “Modeling of Micro-EDM process parameters through Response Surface Methodology”, Proceedings of the 23rd International and 2nd AIMTDR Conference, Dec. 15-17, 2008, IIT Madras, pp. 621-626. ISBN 9788190423571
  4. S. Mondal, G. Kibria, “An investigation of the performance of HSS twist drilling tool on Low carbon steel”, Proceedings of the 23rd International and 2nd AIMTDR Conference, Dec. 15-17, 2008, IIT Madras, (poster presentation), pp. 85-89. ISBN 9788190423571
  5. G. Kibria, B. Bhattacharyya, “Application of De-ionized water in EDM for micromachining of Ti-6Al-4V”, Proceedings of 2nd International Conference on Recent Advances in Material Processing Technology (RAMPT 09), 25 – 27 February 2009, National Engineering College, Tamilnadu, India, pp. 449-453.
  6. G. Kibria, B.B.  Pradhan, B. R. Sarkar, B. Bhattachayya, “Recent advancements in Micro-EDM process: A review”, Proceedings of the 2nd International Conference on Recent Advances in Material Processing Technology (RAMPT 09), 25 – 27 February 2009, National Engineering College, Tamilnadu, India, pp. 454-460.
  7. G. Kibria, B. Sharma, B. Doloi, B. Bhattacharyya, “Experimental Investigation into Pulsed Nd:YAG Laser Micro-turning of engineering ceramics”, Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT 2009, International Islamic University Malaysia, 26-29 October, 2009.
  8. G. Kibria, B. C. Naskar, B. Doloi, B. Bhattacharyya, “Parametric Analysis on pulsed Nd:YAG Laser microgrooving of alumina”, Proceedings of the Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), 11-12 December 2009, PSG college of technology, Coimbatore, pp. D1-D6. ISBN 9788190792950
  9. G. Kibria, B.B.  Pradhan, B. R. Sarkar, B. Bhattachayya, “Micro-hole machining by EDM employing abrasive mixed deionized water”, Proceedings of the Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), 11-12 December 2009, PSG college of technology, Coimbatore, pp. C11-C15. ISBN 9788190792950
  10. Josephine P., G. Kibria, B. Doloi, B. Bhattacharyya, “Analysis of Nd: YAG Laser Marking on Advanced Ceramics using RSM Based Approach”, Proceedings of the Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), 11-12 December 2009, PSG college of technology, Coimbatore, pp. D7-D12. ISBN 9788190792950
  11. B.B.  Pradhan, A. P. Tiwary, G. Kibria, B. Bhattacharyya, “Investigation on the effect of changing and constant polarity during micro-electro-discharge machining of C-40 steel”, Proceedings of the Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), 11-12 December 2009, PSG college of technology, Coimbatore, pp. C6-C10. ISBN 9788190792950
  12. G. Kibria, B. Doloi, B. Bhattacharyya, “Nd:YAG Laser micro-turning of alumina ceramics”, Proceedings of the International Conference   on   Advances   in Mechanical   and    Building   Sciences   in   the   3rd   millennium (ICAMB 2009), 14-16 December, 2009, VIT University, Vellore, pp. 823-827.
  13. G. Kibria, B. Doloi, B. Bhattacharyya, “Optimization of Nd:YAG laser micro-turning process using response surface methodology”, Proceedings of the 3rd International & 24rd AIMTDR organized by Andhra University.
  14. G. Kibria, B. Bhattacharyya, “Analysis of micro-hole machining process in EDM of Ti-6Al-4V alloy using Taguchi Methodology”, Proceedings of the 3rd International & 24rd AIMTDR organized by Andhra University. (poster presentation)
  15. G. Kibria, B. Bhattacharyya, “Analysis on Geometrical Accuracy of Microhole during Micro-EDM of Ti-6Al-4V using Different Dielectrics”, Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT 2010, Paris, France, AIP Conference Proceedings.
  16. G. Kibria, B. Bhattacharyya, “Optimization of micro-electrical discharge machining using a neural network integrated simulated annealing, Fourth International Conference on Advances in Mechanical Engineering (ICAME 2010), SVNIT, Surat, pp. 316-320.
  17. G. Kibria, B. Doloi, B. Bhattacharyya, “Optimization of Nd:YAG Laser Micro-turning Process based on Response Surface Methodology and Artificial Neural Network”, Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT 2011, Istanbul, Turkey, during July 13-16, 2011.
  18. G. Kibria, B. Doloi, B. Bhattacharyya, “Investigation into overlapping phenomena during Nd:YAG laser micro-turning process of alumina ceramic”, Proceedings of the Seventh International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 7), 10-11 December 2011, Production Engineering Department, College of Engineering, Pune, India, pp. 117-122.
  19. G. Kibria, B. Doloi, B. Bhattacharyya, “Investigation and Analysis on Pulsed Nd:YAG Laser Micro-turning Process of Alumina at Various Defocusing Conditions”, Proceedings of 4th International & 25th AIMTDR Conference (2012), Production Engineering Department, Jadavpur University, Kolkata held during December 14 - 16, 2012, pp. 1140-1146. ISBN 9789382062929
  20. G. Kibria, B. Doloi, B. Bhattacharyya, “Comparative study of surface roughness criteria during pulsed Nd:YAG laser micro-turning of alumina ceramic at laser focused and defocused conditions”, Proceedings of the 5th International and 26th AIMTDR Conference, held at IIT Guwahati, December 12th–14th, 2014 (paper ID 299). ISBN: 978-8-19274-612-8
  21. I.Shivakoti, G.Kibria, B.B.pradhan, Investigation and Fuzzy Based Modeling of Micro EDM Process During Machining of Micro-Hole in D3 Die Steel Material Employing De-ionized Water, Proceedings of 5th International & 26th All India Manufacturing technology, Design and Research Conference, pp 371-1-371-6, Dec 12-14, 2014 (paper ID 371), ISBN: 978-8-19274-612-8
  22. G. Kibria, B. Doloi, B. Bhattacharyya, “Generation of Defined Rough Micro-turning Surface on Aluminum Oxide (Al2O3) Ceramics during Pulsed Nd:YAG Laser Micro-turning Process”, Proceedings of the 3rd International Conference on Laser and Plasma Application in Materials Science, jointly organized by IIT Kharagpur, IIT Kanpur, CDAT, Algeria and IIM Kolkata, held at Kolkata during January 15-17, 2015, pp. 60-63. ISBN 9789384935108
  23. G. Kibria, B. Doloi, B. Bhattacharyya, “Influence of process parameters on surface roughness and depth deviation criteria during pulsed Nd:YAG laser micro-turning process of Aluminum Oxide ceramics”, Proceedings of the Ninth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 9), 10-12 December 2015, Mechanical Engineering Department, IIT Bombay, India.
  24. G. Kibria, Sarfaraj Ansary, Green Building: A Brief Study on Green Site Developments, Proceedings of the International Conference on Emerging Trends in Informatics & Communication (ICETIC), held at Sabita Devi Education Trust - Brainware Group of Institutions, Kolkata, during February 20-21, 2016, pp. 75-82.
  25. Omar Faruk Biswas, G. Kibria, Current Research Trends and Developments in Robotic Welding Technology, Proceedings of the International Conference on Emerging Trends in Informatics & Communication (ICETIC), held at Sabita Devi Education Trust - Brainware Group of Institutions, Kolkata, during February 20-21, 2016, pp. 67-74.
  26. O.F. Biswas, A. Sen, G. Kibria, B. Doloi, B. Bhattacharyya, Experimental Investigation into Spiral Micro-grooving on Aluminium using Fiber Laser, Proceedings of the 6th International and 27th AIMTDR Conference (AIMTDR 2016), held at Production Engineering Department, College of Engineering, Pune, India, 16 - 18 December 2016, pp. 411-415.
  27. H. M. Tariq Aziz, A. Sen, G. Kibria, B. Doloi, B. Bhattacharyya, Parametric Analysis and Optimization of Surface Finish obtained during Microtexturing on Titanium using Pulsed Nd: YAG Laser, Proceedings of the 6th International and 27th AIMTDR Conference (AIMTDR 2016), held at Production Engineering Department, College of Engineering, Pune, India, 16 - 18 December 2016, pp. 525-529.
  28. O.F. Biswas, G. Kibria, B. Doloi and B. Bhattacharyya, Study and Analysis of Spiral Micro-grooving Process of Aluminium Using Pulsed Fiber Laser, Proceedings of the 10th International Conference On Precision, Meso, Micro and Nano Engineering (COPEN 2017) held at IIT Madras, Chennai, India during December 07 – 09, 2017, pp. 189-192. ISBN: 978-93-80689-28-9
  29.  O.F. Biswas, A. Sen, G. Kibria, B. Doloi and B. Bhattacharyya, Experimental Investigation of Microchannel Milling on Zirconia (ZrO2) By Using Pulsed Fiber Laser, Proceedings of the 10th International Conference On Precision, Meso, Micro and Nano Engineering (COPEN 2017) held at IIT Madras, Chennai, India during December 07 – 09, 2017, pp. 349-352. ISBN: 978-93-80689-28-9
  30. O. F. Biswas, A. Sen, G. Kibria, B. Doloi, B. Bhattacharyya, Experimentation and Analysis of Spiral Micro-Grooving Process on Aluminium Using Pulsed Fiber Laser, Proceedings of the International Conference on Advancements in Mechanical Engineering (ICAME 2020) held at Aliah University, Kolkata during 16 to 18 January 2020. "e-ISBN 978-81-943641-6-0"
  31. Shivakoti, I., Pandey, D., Kibria, G., Sharma, A., & Pradhan, B. B. (2020, November). State of the Art: Laser Surface Texturing for Biomedical Applications. In 2020 International Conference on Decision Aid Sciences and Application (DASA) (pp. 473-479). IEEE. DOI: 10.1109/DASA51403.2020.9317267
  32. Shivakoti, I., Peshwani, B., Kibria, G., Pradhan, B. B., & Sharma, A. (2019, April). Parametric Optimization of WEDM using MABAC Method. In 2019 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO) (pp. 1-4). IEEE. DOI: 10.1109/ICMSAO.2019.8880459
  33. J. Peter, G. Kibria, B. Doloi, B. Bhattacharyya, “Laser Marking on Engineering Materials using Nd:YAG Laser: An Overview”, Proceedings of the National Conference on Recent Trends in Manufacturing Technology (RTMT'09), College of Engineering Guindy, Anna University, 6-7th March 2009.
  34. B.B. Pradhan, G. Kibria, B.R. Sarkar, B. Bhattacharyya, “Advances in Micro-EDM”, Proceedings of the National Conference on Advances in Materials and Manufacturing Technology (AMMT-2007), 21-22 Sept., 2007, PEC Chandigarh, pp. 21-28.
  35. G. Kibria, B.R. Sarkar, B. Bhattacharyya, “Analysis of geometrical accuracy of micro-holes using different dielectrics in micro-EDM”, Proceedings of the National Conference on Recent Trends in Manufacturing Technology (RTMT'09), College of Engineering Guindy, Anna University, 6-7th March 2009.
  36. G. Kibria, B. Doloi, B. Bhattacharyya, “Laser micro-turning of Aluminum oxide (Al2O3) ceramic”, Proceedings of the Eighth Biennial Workshop on Application of Laser in Mechanical Industries (WALMI 2010) and Seminar on Application of Laser in Materials Processing, Jadavpur University, Kolkata, 7-9 January, 2010, pp. 287-292.
  37. G. Kibria, B. Doloi, B. Bhattacharyya, “Pulsed Nd:YAG Laser Micromachining of Ceramics”, Proceedings of the National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), Production Engineering Department, Jadavpur University, Kolkata, 19-20 February, 2010, pp. 242-247.
  38. G. Kibria, B. Doloi, B. Bhattacharyya, “Optimization of Surface Roughness during Nd:YAG Laser Micro-turning Process of Alumina”, Proceedings of the National Conference on Industrial Engineering (NCIE 2011), West Bengal University of Technology, Kolkata, 17-18 February, 2011.
  39. G. Kibria, B. Bhattacharyya, “Effect of boron carbide (B4C) additive during micro-electrical discharge machining of Ti-6Al-4V alloy”, Proceedings of the National Conference on Industrial Engineering (NCIE 2011), West Bengal University of Technology, Kolkata, 17-18 February, 2011.
  40. G. Kibria, B. Doloi, B. Bhattacharyya, “Optimization of Surface Roughness and Material Ablation Rate during Nd:YAG Laser Micro-turning Process”, Proceedings of the National Conference on Recent Trends in Manufacturing Technology (RTMT'11), College of Engineering Guindy, Anna University, 11-13th March 2011.
  41. G. Kibria, B.B. Pradhan, “Experimental Analysis on Micro-Electrical Discharge Machining Performance using Boron Carbide (B4C) Powder Mixed Dielectrics”, Proceedings of the National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’11), Punjab Technical University, Punjab, 7-8 October, 2011, pp. 133-138.
  42. G. Kibria, B. Doloi, B. Bhattacharyya, “The Effect of Defocused Machining during Laser Micro-turning Process of Aluminium Oxide (Al2O3) Ceramics”, Proceedings of 1st National Conference on Micro and Nano Fabrication at Central Manufacturing Technology Institute (CMTI), Bangalore on 21-23 January, 2013. ISBN 9788189650506
  43. Sk. R. Iqbal, G. Kibria, “Experimental Analysis on Micro-electrical Discharge Machining Performance using Boron Carbide (B4C) Powder Mixed Dielectrics”, Proceedings of 1st National Conference on Micro and Nano Fabrication at Central Manufacturing Technology Institute (CMTI), Bangalore on 21-23 January, 2013. ISBN 9788189650506
  44. G. Kibria, B. Doloi, B. Bhattacharyya, “Investigation on Nd:YAG Laser Micro-Tuning Process of Alumina Ceramic to Study Overlapping Phenomena”, Proceedings of National Conference on Mechanical Engineering: Retrospect and Prospect (NCMERP - 2013) organized by Birbhum Institute of Engineering and Technology, Suri, West Bengal on 2 – 3 February 2013.
  45. G. Kibria, B. Doloi, B. Bhattacharyya, “Response of Surface Methodology and Artificial Neural Network Based Optimization of Nd:YAG Laser Micro-Tuning Process of Alumina Ceramics”, Proceedings of National Conference on Mechanical Engineering: Retrospect and Prospect (NCMERP - 2013) organized by Birbhum Institute of Engineering and Technology, Suri, West Bengal on 2 – 3 February 2013.
  46. I. Shivakoti, G. Kibria, Sk. Rameez Iqbal, B.B. Pradhan, “Performance of boron carbide (B4C) added dielectric during micro-hole machining in EDM process”, Proceedings of National Conference on Mechanical Engineering: Retrospect and Prospect (NCMERP - 2013) organized by Birbhum Institute of Engineering and Technology, Suri, West Bengal on 2 – 3 February 2013.
  47. I. Shivakoti, G. Kibria, “Optimization of micro-electrical discharge machining using a neural network integrated simulated annealing”, Proceedings of National Conference on Mechanical Engineering: Retrospect and Prospect (NCMERP - 2013) organized by Birbhum Institute of Engineering and Technology, Suri, West Bengal on 2 – 3 February 2013.

Journal Papers Published

  1. G. Kibria, B. R. Sarkar, B.B.  Pradhan, B. Bhattachayya, “Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy”, International Journal of Advanced Manufacturing Technology, Volume 48, Numbers 5-8, 2010, pp. 557-570.
  2. G. Kibria, B. Doloi, B. Bhattacharyya, “Experimental analysis on Nd:YAG Laser Micro-turning of Alumina Ceramic”, International Journal of Advanced Manufacturing Technology, Volume 50, Numbers 5-8, 2010, pp. 643-650.
  3. G. Kibria, B. Sharma, B. Doloi, B. Bhattacharyya, “Experimental Investigation into Pulsed Nd:YAG Laser Micro-turning of engineering ceramics”, Advanced Materials Research, Vol. 264-265, 2011, pp. 1318-1323.
  4. G. Kibria, B. Bhattacharyya, “Investigation into micro-hole geometrical accuracy during micro-EDM of Ti-6Al-4V employing different dielectrics”, International Journal of Machining and Machinability of Materials (IJMMM), Vol. 10, No. 4, 2011, pp. 310-325.
  5. Shabbiruddin, G. Kibria, An Efficient Method for Speed Control of DC Shunt Motor using Response Surface Methodology (RSM) Approach, Journal of Control Engineering and Technology (JCET), Vol. 1, No. 1, 2011, pp. 11-16.
  6. G. Kibria, B. Doloi, B. Bhattacharyya, “Optimisation of Nd:YAG laser micro-turning process using response surface methodology”, International Journal of Precision Technology, Vol. 3, No. 1, 2012, pp. 14-36.
  7. I. Shivakoti, G. Kibria, S. Diyaley, B.B. Pradhan, “Analysis of Material Removal Rate using Genetic Algorithm Approach”, International Journal of Scientific & Engineering Research, Volume 3, Issue 5, May-2012, pp. 747-752.
  8. G. Kibria, B. Doloi, B. Bhattacharyya, “Predictive Model and Process Parameters Optimization of Nd:YAG Laser Micro-turning of Ceramics”, International Journal of Advanced Manufacturing Technology, Vol. 65, No. 1-4, 2013, pp. 213-229.
  9. G. Kibria, B.B.  Pradhan, B. Bhattachayya, “Experimentation and Analysis into Micro-hole Machining in EDM on Ti-6Al-4V Alloy using Boron Carbide Powder Mixed De-Ionized Water”, International Journal of Materials, Manufacturing and Design (IJMMD), Vol. 1, No. 1, 2012, pp. 17-35.
  10. G. Kibria, B. Doloi, B. Bhattacharyya, “Experimental Investigation and Multi-objective Optimization of Nd:YAG Laser Micro-turning Process of Alumina Ceramic using Orthogonal Array and Grey Relational Analysis”, Journal of Optics and Laser Technology, Vol. 48, 2013, pp. 16-27.
  11. G. Kibria, B.B.  Pradhan, “Multi-Criteria Optimization of Electro-discharge Micro-Hole Machining of Ti-6Al-4V Super Alloy”, International Journal of Machining and Forming Technologies, Vol. 4, No. 3/4, pp. 157-158.
  12. I. Shivakoti, G. Kibria, S. Diyaley and B.B. Pradhan, “Multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water dielectric”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. 3, No. 1, 2013, pp. 27-39.
  13. G. Kibria, B. Doloi, B. Bhattacharyya, “Investigation into the effect of overlap factors and process parameters on surface roughness and machined depth during micro-turning process with Nd:YAG laser”, Journal of Optics and Laser Technology, Vol. 60, 2014, pp. 90-98.
  14. G. Kibria, B. Doloi, B. Bhattacharyya, “Parametric study and optimization of Nd:YAG laser micro-turning process of different grade of alumina ceramics based on Taguchi methodology”, International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS), Vol. 2, No. 1, 2014, pp. 15-46.
  15. G. Kibria, I. Shivakoti, B. Bhattacharyya, “Experimentation and analysis into micro-hole machining in EDM on Ti-6A1-4V alloy using boron carbide powder mixed de-ionized water”, International Journal of Manufacturing, Materials and Mechanical Engineering (IJMMME), Vol. 4, No. 1, 2014, pp. 22-41.
  16. G. Kibria, B. Doloi, B. Bhattacharyya, “Modeling and Optimization of Nd:YAG Laser Micro-turning Process during Machining of Aluminum Oxide (Al2O3) Ceramics using Response Surface Methodology and Artificial Neural Network”, Manufacturing Review, Vol. 1, Article No. 12, 2014, pp. 1-8.
  17. G. Kibria, B. Doloi, B. Bhattacharyya, “Investigation and analysis on pulsed Nd:YAG laser micro-turning process of aluminium oxide (Al2O3) ceramic at various laser defocusing conditions”, International Journal of Advanced Manufacturing Technology, Volume 76, Issue 1-4 , 2015, pp 17-27.
  18. G. Kibria, B. Doloi, B. Bhattacharyya, “Generation of Defined Micro-turning Surface Roughness on Al2O3 Ceramic by Pulsed Nd:YAG Laser Micro-turning Process”, Lasers in Engineering, Vol. 35, Issue 1-4, 2016, pp. 227-238.
  19. I. Shivakoti, P.P Das, G.Kibria, B.B. Pradhan, Z.Mustafa, R.K. Ghadai, Multi Response Optimization of Laser Micro Marking Process: A Grey- Fuzzy Approach, IOP Conf. Series: Materials Science and Engineering Vol. 217, pp. 1-7, 2017.
  20. G. Kibria , S. Chatterjee , I. Shivakoti , B. Doloi , B. Bhattacharyya, RSM Based Experimental Investigation and Analysis into Laser Surface Texturing on Titanium using Pulsed Nd:YAG Laser, IOP Conference Series: Materials Science and Engineering, Vol. 377, pp. 1-12, 2018.
  21. G. Kibria , Leeom P. Lepcha , I. Shivakoti , B. Doloi , B. Bhattacharyya, Pulsed Nd:YAG Laser Micro-turning of Alumina to Study the Effect of Overlap Factors on Surface Roughness Performance, IOP Conference Series: Material Science and Engineering, Vol. 377, pp. 1-7, 2018.
  22. I. Shivakoti, G. Kibria, P. M. Pradhan, B. B. Pradhan, A. Sharma, ANFIS Based Prediction and Parametric Analysis during Turning Operation of Stainless Steel 202, Materials and Manufacturing Processes Vol. 34, Issue 1, pp. 112-121, 2019.
  23. I. Shivakoti, G. Kibria, B.B. Pradhan, Predictive Model and Parametric Analysis of Laser Beam Marking on Gallium Nitride Material Using Diode Pumped NDYAG Laser, Optics and Laser Technology, Vol. 115, pp.58-70, 2019.
  24. O. F. Biswas, A. Sen, G. Kibria, B. Doloi, B. Bhattacharyya, Experimental Analysis of Fiber Laser Milling Process for Generating Microchannel on Zirconia (ZrO2), Materials Today: Proceedings Vol. 18, 2019, pp. 3566–3574.
  25. R. Haque, G. Kibria, M. Sekh, S. Haidar, Enhancement of Surface Quality of AISI-D3 Steel after Electrical Discharge Machining (EDM) with Aluminium Powder Mixed in the Dielectric, International Journal of Engineering and Advanced Technology (IJEAT), Vol. 9, 2019, pp. 5596-5601.
  26. R. Phipon, I. Shivakoti, K. Kalita, G. Kibria, A. Sharma, R. K. Ghadai, Laser beam micro engraving on silicon carbide,  Materials and Manufacturing Processes,  Volume 35, Issue 12, 2020, pp. 1372-1382.
  27. Ishwer Shivakoti, Golam Kibria, Soham Das, Ashis Sharma, Bal Bahadur Pradhan, and Somenath Chatterjee, Laser surface texturing on Ti-6AI-4V, Materials and Manufacturing Processes, Volume 36, Issue 7, 2021, pp. 858-867.
  28. Ishwer Shivakoti, Golam Kibria, Robert Cep, Bal Bahadur Pradhan, Ashis Sharma, Laser Surface Texturing for Biomedical Applications: A Review, Coatings, 2021, Vol. 11, No. 2, pp. 124.
  29. Omar Faruk Biswas, Abhishek Sen, Ishwer Shivakoti, Golam Kibria, Parametric Influences on Heat Affected Zone in Microchannel Milling Process of Zirconia Ceramic, Periodica Polytechnica Mechanical Engineering Vol. 65, No. 2, 2021, pp. 189-196.
  30. Ziyauddin Seikh, Abu Huraira Biswas, Md Kamaruzzaman, Rafiqul Haque, Golam Kibria, Shamim Haidar, Mukandar Sekh, Density, hardness and wear responses of aluminium-copper-magnesium alloys, Materials Today: Proceedings, Volume 47, Part 10, 2021, Pages 2358-2363.
  31. S. Kunar, R. Kumar, S.K. Dash, G. Kibria, Bh.V. Prasad, Influence of maskless electrochemical micromachining process parameters during fabrication of complex micropattern, Materials Today: Proceedings, 2021, 47, pp. 2426–2430.
  32. S. Kunar, G. Kibria, Improvement in performance criteria of varactor micropattern by pulsed maskless electrochemical micromachining, Materials Today: Proceedings, Volume 47, 2021, pp. 2247-2252.
  33. S. Kunar, G. Kibria, Influence of maskless electrochemical micromachining process parameters during microtexturing, Materials Today: Proceedings, Volume 47, Part 10, 2021, Pages 2379-2383.
  34. Kunar, S.; Tiwary, A. P.; Kibria, G.; Prasad, Bh. V., Investigation into Machining Accuracy of Micro Circular Pattern Fabricated by Maskless Electrochemical Micromachining, Journal of Engineering Science & Technology Review . 2021, Vol. 14 Issue 4, p99-104.
  35. Rafiqul Haque, Mukandar Sekh, Golam  Kibria  and  Shamim  Haidar, “Comparative Study of  Parametric Effects on the Performance of Simple and Powder Mixed EDM using Aluminium and Graphite Powder on Inconel X750 Alloy”,  Materials Today: Proceedings, Volume 46, Part 17, 2021, Pages 8366-8373.
  36. Shivakoti, I., Kalita, K., Kibria, G., Sharma, A., Pradhan, B.B., Ghadai, R.K., Parametric analysis and multi response optimization of laser surface texturing of titanium super alloy, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Volume 43, Issue 8, August 2021, 400.
  37. O. F. Biswas, A. Sen, G. Kibria, S. Kunar, Parametric study of surface characteristics of laser micro-channel milling of zirconia (ZrO2) at defocused condition, Materials Today: Proceedings, 2021, 47, pp. 2288–2292.
  38. I. Shivakoti, P.P. Das, G. Kibria, B. Khanal, A. Bhattarai, N.K. Gupta, B.B. Pradhan and A. Sharma, Selection of Optimal Turning Parameters Using Multi-Criteria Decision Methods, Journal of Multiple-valued Logic and Soft Computing, Vol. 37, Issue 5-6, 2021, p. 601-618.
  39. S. Kunar, G. Kibria and I. Shivakoti, Generation of Microtextured Characteristics using Maskless Electrochemical Micromachining, IOP Conference Series: Materials Science and Engineering, 1166 012030.
  40. Jaideep Dutta, Nabankur Mandal, Prasenjit Chatterjee, Golam Kibria, Evaluation of thermal characteristics of laser induced heating of microfilm in relation to printed circuit board manufacturing, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022, ONLINE, doi:10.1177/09544089221116165.
  41. Ziyauddin Seikh, Mukandar Sekh, Sandip Kunar, Golam Kibria, Rafiqul Haque, Shamim Haidar, Rice Husk Ash Reinforced Aluminium Metal Matrix Composites: A Review, Materials Science Forum, Vol. 1070, pp. 55-70.
  42. Z Seikh, M Sekh, G Kibria, R Haque, S Haidar, Density, Hardness, and Wear Responses of Rice Husk Ash Reinforced Aluminium Composites, Materials Science Forum Vol. 1074, pp. 67-78
  43. Rafiqul Haque, Mukandar Sekh, Golam Kibria, Shamim Haidar, Improvement of Surface Quality of Ti-6Al-4V Alloy by Powder Mixed Electrical Discharge Machining using Copper Powder, Facta Universitatis, series: Mechanical Engineering, Vo. 21, No. 1, 2023, pp. 63-79.
  44. Satish Pradhan, Ishwer Shivakoti, Golam Kibria, Ashis Sharma, Mukandar Sekh, Laser surface texturing: A comprehensive review, AIP Conf. Proc. 2786, 020010 (2023), https://doi.org/10.1063/5.0145960.
  45. G. Kibria, B. Doloi, B. Bhattacharyya, “Present Status of Nd:YAG Laser Beam Micromachining of Engineering Ceramics”, Journal of Manufacturing Technology Today, CMTI, Bangalore, vol. 8, No. 7, July 2009, pp. 3-12.
  46. B.B. Pradhan, B.R. Sarkar, G. Kibria, B. Bhattacharyya, “EDM with rotational electrode for machining micro holes in Ti-6Al-4V”, Journal of Institute of Engineers (India), vol. 89, March, 2009, pp. 3-8.
  47. G. Kibria, B. Bhattacharyya, Effect of boron carbide (B4C) additive during microelectrical discharge machining of Ti-6Al-4V alloy, Journal of the Association of Engineers, India, Vol. 83, No.3 & 4, 2014, pp. 25-34.
  48. G. Kibria, B. Doloi, B. Bhattacharyya, Optimization of surface roughness during Nd:YAG laser micro-turning process of alumina, Journal of the Association of Engineers, India, Vol. 84, No. 3&4, 2014, pp. 36-48.

Books Published

  1. Non-traditional Micromachining Processes-Fundamentals and Applications, G. Kibria (Eds.), B.Bhattacharyya (Eds.), J. P. Davim (Eds.), book title series: Materials Forming, Machining and Tribology, Springer International Publishing AG, Switzerland, 2017 (ebook ISBN 978-3-319-52009-4, Hardcover ISBN 978-3-319-52008-7, DOI 10.1007/978-3-319-52009-4).
  2. Micro Electrical Discharge Machining Processes-Technologies and Applications, Golam Kibria (Eds.), Muhammad Pervej Jahan (Eds.), Bijoy Bhattacharyya (Eds.), book title series: Materials Forming, Machining and Tribology, Springer International Publishing AG, Switzerland, 2019 (Hardcover ISBN 978-981-13-3073-5, ebook ISBN 978-981-13-3074-2, DOI 10.1007/978-981-13-3074-2).
  3. Accuracy Enhancement Technologies for Micromachining Processes, Golam Kibria (Eds.), Bijoy Bhattacharyya (Eds.), Book Series: Lecture Notes in Mechanical Engineering, Springer Nature Singapore Pte Ltd, 2020, ISBN 978-981-15-2116-4, eBook ISBN: 978-981-15-2117-1, DOI: 10.1007/978-981-15-2117-1.
  4. Advances in Abrasive Based Machining and Finishing Processes, S. Das (Eds.), G. Kibria (Eds.), B. Doloi (Eds.), B. Bhattacharyya (Eds.), Book Series: Materials Forming, Machining and Tribology, Springer Nature Singapore Pte Ltd, 2020, eBook ISBN 978-3-030-43312-3, Hardcover ISBN 978-3-030-43311-6, DOI 10.1007/978-3-030-43312-3.
  5. Sandip Kunar (Eds.), Golam Kibria (Eds.), Prasenjit Chatterjee (Eds.), Asma Perveen (Eds.), Hybrid Micromachining and Microfabrication Technologies: Principles, Varieties and Applications, ISBN: 978-1-394-17493-5, May 2023, Imprint: Wiley-Scrivener.
  6. G. Kibria, V.U. Rathod, “Introduction to Advanced Machining and Finishing Processes”, Narosa Publishing House, New Delhi, India, 2019, ISBN:    978-81-8487-654-3.
  7. G. Kibria, “Investigation Into Micro-EDM During Micro-Hole Machining On Ti-6Al-4V: Experimentation and Analysis”, ISBN 10: 3659448249,  ISBN 13: 9783659448249, LAP LAMBERT Academic Publishing, Saarbrücken, Germany, 2013.
  8. G. Kibria, “Experimentation Employing Different Dielectrics During Micro-EDM”, ISBN-10: 3659342394, ISBN-13: 978-3659342394, LAP LAMBERT Academic Publishing, Saarbrücken, Germany, 2013

Awards

  1. Gold medal for standing in first rank in M.E. Degree (2008) in Production Engineering Department, Jadavpur University, Kolkata.
  2. I.S.T.E. National Award for Best M.Tech. Thesis in Mechanical Engineering (2008).
  3. Institution Prize (Gold Medal) of 2008-2009 from The Institution of Engineers (India) for the paper entitled “EDM with Rotational Electrode for Machining Micro-holes in Ti-6Al-4V”.
  4. Best paper award in “International Conference on Materials and System Engineering (ICMSE-2021)”, paper title “Influence of Maskless Electrochemical Micromachining Process Parameters during Fabrication of Complex Micropattern”. Conference Held on 7-8 May 2021 at SJB Institute of Technology, Bengaluru, India

Ph.D. Thesis Guidance

1. Scholar Name: Dr. Omar Faruk Biswas
Thesis Title: Experimental study and parametric influences in laser micro-milling on advanced ceramics
Completed Ph.D. on 03.11.2022

2. Scholar Name: Dr. Rafiqul Haque
Thesis Title: Analysis of the Parametric Effects on the Performance of Powder Mixed Electrical Discharge Machining (PMEDM) on Various Alloy Materials
Completed Ph.D. on 16.09.2021

3. Scholar Name: Dr. Ishwer Shivakoti
Thesis Title: Experimental Investigation on Laser Surface Texturing on Engineering Materials
Completed Ph.D. on 31.08.2023

4. Scholar Name: Mr. Subhadip Ray
Broad Area of Thesis Work: Advanced Manufacturing (Ongoing)

5. Scholar Name: Mr. Nabankur Mandal
Broad Area of Thesis Work: MCDM in Advanced Manufacturing (Ongoing)

6. Scholar Name: Mr. Md. Farid Hossain
Broad Area of Thesis Work: Advanced Manufacturing (Ongoing)

MASTER Thesis Guidance

1. Student Name: Mr. Anwarul Haque
Thesis Title: Analysis and Experimental Investigation of Electrical Discharge Machining (EDM) Process during Machining of Different Job Materials

2. Student Name: Mr. Omar Faruk Biswas
Thesis Title: Experimental Investigation on Spiral Micro-Grooving on Aluminium using Fiber Laser

3. Student Name: Mr. Hazari Md Tariq Aziz
Thesis Title: Parametric Analysis and Optimization of Laser Surface Texturing Process on Titanium by Pulsed Nd:YAG Laser

4. Student Name: Mr. Tarique  Islam
Thesis Title: Experimental investigation into electrical discharge machining on titanium material for surface modification and process performance

5. Student Name: Mr. Abdul Rizwan  Ansari
Thesis Title: Parametric analysis of electrical discharge drilling process on commertially pure titanium material

6. Student Name: Mr. Md Kousar Imam
Thesis Title: Investigation into Parametric Effects on Machining Rate and Surface Characteristics during Powder Mixed EDM of Pure Titanium

7. Student Name: Mr. Samim Alam
Thesis Title: Experimentation on Spiral Finishing Process of EDM Drilled Hole on Titanium Material

8. Student Name: Mr. Md Farid Hossain
Thesis Title: Development and Experiment on Micro Wire EDM Turning of Tungsten

9. Student Name: Mr. Md Ibrahim Mallick
Thesis Title: Influence of Wire EDM of Texture Machining and Effect of  Surface Characteristics after Texturing

10. Student Name: Mr. Mustafiz Ahmed
Thesis Title: Machining of an Array of Micro-fins using Wire-EDM and Its Parametric Analysis of Stainless Steel

11. Student Name: Mrs. Fensi Khatun
Thesis Title: Experimentation and Analysis on  Characteristics of Fiber Laser Micro Marking on Ti-6Al-4V based on RSM Approach

12. Student Name: Mr. Manjur Aktar
Thesis Title: Experimental Investigation of Micro-Milling on Magnesium Alloy (AZ31) using Pulsed Fiber Laser

13. Student Name: Mrs. Saraban Tahura
Thesis Title: Parametric Analysis and Optimization of Fiber Laser Micro-channeling on Ti-6Al-4V

Invited Lectures

  1. Lecture title “Micro-EDM: Types, Technologies and Recent Research Advancements” in Three Day National Workshop on Micromanufacturing, 17th-19th March, 2016 Production Engg. Dept., Jadavpur University, Kolkata
  2. Lecture title “Micro-EDM: Technologies and Recent Research Advancements” in Three Day National Seminar on Micromachining, 13-15 September 2016 Mechanical Engineering Department, MCKV Institute of Engineering, Liluah, Howrah, Kolkata
  3. Laser Beam Micro-turning and Micro-grooving: An Overview, One Day National Workshop on “Laser Material Processing Technology” (NWLMPT-2016) on 27th September 2016, Production Engineeing Department, Jadavpur University, Kolkata.
  4. Lecture title “An overview of micromachining processes” One Day National Workshop “Mech-X-Ploration - Recent Trends in Mechanical Engineering” on 28-29 March 2018 in Future Institute of Engineering and Management, Kolkata.
  5. Lecture title “Manufacturing Processes: Fundamental to Advanced Technologies”, One Day Workshop organized by Techno India, Batanagar, Kolkata on 28 February 2019
  6. Lecture title “Laser Micromachining: Fundamental & Research Issues”, One Day Workshop organized by Calcutta Institute of Technology, Howrah on 5 August 2020
  7. Lecture title “Introduction and Research Perspective of Micromachining Processes”, One Day Workshop organized by Regent Education and Research Foundation, Barrackpore on 20 August 2020

Membership Of Learned Societies

  1. Associate Member of The Institution of Engineers, India. (Membership Id: AM1353376)
  2. International Association of Engineers (IAENG), (Membership Id: 274168)

Orientation/Refresher/QIP CourseAttended/Organized

  1. Attended Refresher Course “Management for a better societal environment – a socio technical approach” held during 3rd July to 24th July, 2015 organized by Department of Civil Engineering & UGC-Human Resource Development Centre, Jadavpur University, Kolkata
  2. Attended Orientation Course "UGC sponsored 61st Orientation Programme" held during 13th June to 11th July, 2016 organized by UGC-Human Resource Development Centre, Jadavpur University, Kolkata
  3. Attended Refresher Course “Data Science and its Applications” held during 22nd February to 6th March, 2021 organized UGC-Human Resource Development Centre, Jadavpur University, Kolkata

Seminar/Conference/Workshop

  1. Two days Research Workshop on Advances in Machining and Grinding Technology, 30-31 March 2006, Kalyani Govt. Engg. College, West Bengal
  2. Three days INDO-US Workshop on Smart Machine Tools, Intelligent Machining Systems and Multi-scale Manufacturing, 18-20 December 2008, PSG College of Technology, Coimbatore, Tamil Nadu
  3. Two days National Workshop on Micromachining and Nanofabrication, 29-30 August 2008, Jadavpur University, Kolkata
  4. 3rd SERC School on Micro Machining, 20-25 July 2009, Indian Institute of Technology (IIT) Kanpur
  5. AICTE and BARC sponsored short term course on Micromanufacturing organized by IIT Kanpur during 30 September to 04 October 2011
  6. International Conference on Emerging Research and Advances in Mechanical Engineering, ERA 2009, Velammal Engineering College, Chennai – 600 066, Tamil Nadu, India
  7. 23rd International and 2nd AIMTDR Conference, Dec. 15-17, 2008, IIT Madras
  8. 2nd International Conference on Recent Advances in Material Processing Technology (RAMPT 09), 25 – 27 February 2009, National Engineering College, Tamilnadu, India
  9. Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), 11-12 December 2009, PSG college of technology, Coimbatore
  10. 3rd International & 24rd AIMTDR organized by Andhra University
  11. 4th International & 25th AIMTDR Conference (2012), Production Engineering Department, Jadavpur University, Kolkata held during December 14 - 16, 2012
  12. 3rd International Conference on Laser and Plasma Application in Materials Science, jointly organized by IIT Kharagpur, IIT Kanpur, CDAT, Algeria and IIM Kolkata
  13. International Conference on Emerging Trends in Informatics & Communication (ICETIC), held at Sabita Devi Education Trust - Brainware Group of Institutions, Kolkata, during February 20-21, 2016
  14. 10th International Conference On Precision, Meso, Micro and Nano Engineering (COPEN 2017) held at IIT Madras, Chennai, India during December 07 – 09, 2017
  15. National Conference on Recent Trends in Manufacturing Technology (RTMT'09), College of Engineering Guindy, Anna University, 6-7th March 2009
  16. National Conference on Advances in Materials and Manufacturing Technology (AMMT-2007), 21-22 Sept., 2007, PEC Chandigarh
  17. Eighth Biennial Workshop on Application of Laser in Mechanical Industries (WALMI 2010) and Seminar on Application of Laser in Materials Processing, Jadavpur University, Kolkata, 7-9 January, 2010
  18. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), Production Engineering Department, Jadavpur University, Kolkata, 19-20 February, 2010
  19. National Conference on Industrial Engineering (NCIE 2011), West Bengal University of Technology, Kolkata, 17-18 February, 2011
  20. National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’11), Punjab Technical University, Punjab, 7-8 October, 2011
  21. National Conference on Micro and Nano Fabrication at Central Manufacturing Technology Institute (CMTI), Bangalore on 21-23 January, 2013
  22. National Conference on Mechanical Engineering: Retrospect and Prospect (NCMERP - 2013) organized by Birbhum Institute of Engineering and Technology, Suri, West Bengal on 2 – 3 February 2013
  23. Three Day National Workshop on Micromanufacturing, 27th-29th March, 2014 Production Engg. Dept., Jadavpur University, Kolkata
  24. Attended Refresher Course “Management for a better societal environment – a socio technical approach” held during 3rd July to 24th July, 2015 organized by Department of Civil Engineering & UGC-Human Resource Development Centre, Jadavpur University, Kolkata
  25. Three Day National Workshop on Micromanufacturing, 17th-19th March, 2016 Production Engg. Dept., Jadavpur University, Kolkata
  26. Attended Orientation Course "UGC sponsored 61st Orientation Programme" held during 13th June to 11th July, 2016 organized by UGC-Human Resource Development Centre, Jadavpur University, Kolkata
  27. Three Days North East Workshop on SQC & Six Sigma Practices, joinly organized by Mechanical Engineering Department, Sikkim Manipal Institute of Technology, Sikkim and ISI, Kolkata held at Sikkim Manipal University, Sikkim during 21-23 November 2016
  28. TEQIP sponsored One Day National Workshop on Hybrid Manufacturing Technology (HMT 2017) held at Production Engineering Department, Jadavpur University, Kolkata on 8th March 2017
  29. TEQIP sponsored One Day National Workshop on Curriculum Development held at Production Engineering Department, Jadavpur University, Kolkata on 9th March 2017
  30. TEQIP sponsored One Day Workshop on Advanced Machining Processes held at Mechanical Engineering Department, Jadavpur University, Kolkata on 22nd March 2017
  31. Two weeks short-term training programme on “Application of MATLAB Control System, Image Processing and Fuzzy Logic Tool Box” from 21 August to 1st September 2017 at National Institute of Technical Teachers’ Training & Research, Kolkata
  32. 1 Day National Seminar (online) on Advances in Machining organized by NITTTR Kolkata in in collaboration with knowledge partner SPIU, Uttar Pradesh held on 26th September, 2020
  33. 2 Weeks Short Term Training Programme through ICT Mode on ICT Tools for Teaching and Learning organised by NITTTR Kolkata from 05/10/2020 to 16/10/2020
  34. 1 Week Short Term Training Programme through ICT Mode on Introduction to Welding Processes organised by NITTTR Kolkata from 21/09/2020 to 25/09/2020
  35. 6 Days AICTE Sponsored Online Short Term Training Programme on "Optimization Techniques: Recent Trends & Applications in Engineering" Organized by Mechanical Engineering Department of MCKV Institute of Engineering during 5th October to 10th October, 2020
  36. 1 Week Online Short Term Course on “Innovation, Start-up and Entrepreneurship” organized by  Innovation, Incubation and Entrepreneurship (IIE) Cell, Ghani Khan Choudhury Institute of Engineering and Technology, Malda in association with MSME,  District Industries Centre, Malda during 7th to 11th December, 2020
  37. 3 Days Online Faculty Development Programme on Industry 4.0 from 2nd July to 4th July 2020 organized by Department of Mechanical Engineering, Dr. M.G.R. Educational and Research Institute, Chennai, India
  38. 1 Week AICTE Training And Learning (ATAL) Academy Faculty Development Programme on Advances in Manufacturing from 04.01.2021 to 08.01.2021 at  Sardar Vallabhbhai National Institute of Technology
  39. 1 Week AICTE Training And Learning (ATAL) Academy Faculty Development Programme on Additive Manufacturing from 09.11.2020 to 13.11.2020 at  Noida Institute of Engineering & Technology
  40. 1 Week AICTE Training And Learning (ATAL) Academy Faculty Development Programme on Mechanical and Manufactuing Engineering from 21.12.2020 to 25.12.2020 at  Vishwakarma Institute of Information Technology Pune
  41. 1 Week AICTE Sponsored Short Term Training Program titled “Advanced Manufacturing Techniques for Medical and Precision Engineering- Phase II” organized by the Department of Mechanical Engineering in association with IIC and IQAC, MVJ College of Engineering Bengaluru,from 08 – 13 February, 2021
  42. 2 Days Webinar on Additive Manufacturing organized by Department of Mechanical Engineering, Rama University, Kanpur during 17 - 18 February 2021
  43. 1 Day International Webinar on "Economic Impact of Covid-19 on India" organized by Department of Economics, Aliah University, Kolkata on 26.06.2020
  44. 1 Day National Webinar on Light Weigting Techniques for Product Design organized by Nalla Narasimha Reddy Education Society Group of Institutions on 07.08.2020
  45. 1 Day International Webinar on Single Point Incremental Forming Process: Advances and Challenges organized by Nalla Narasimha Reddy Education Society Group of Institutions on 08.07.2020
  46. 6 Days Online Faculty Development Programme on Welding for Additive Manufacturing organized by Indian Welding Society and Coimbatore  Institute of Engineering and Technology, Coimbatore, Tamil Nadu during 10.06.2020 to 15.06.2020
  47. Two Week AICTE sponsored Online FDP on “Frontier of 3D Printing Technology and Its Industrial Applications (Phase-II)” organized by  the Department of Mechanical Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram, Krishna (Dt.), Andhra Pradesh, India organized from 25/01/2021 to 06/02/2021




All right reserved: Aliah University © 2024

Design & Developed by Keyline